George

If you find the tower fan is vibrating, it is recommended that you first power off and unplug the unit. Follow these cleaning instructions in the video linked below. It is possible that there may b...

If you find the heater is vibrating, it is recommended that you first power off and unplug the unit. Follow these cleaning instructions in the video linked below. It is possible that there may be s...

In the event you find that you are tightening the height adjustment nut of the pole assembly for the pedestal fan and the pole slides down, this might be a very easy fix. When tightening the adjust...

First and foremost, please be sure that you have aligned the groove on the rear grill with the groove of the motor assembly. If the grill is not aligned, and pressed all of the way into the motor, ...

This is a common question presented in the fan business and a common misconception. Lasko fans are designed as air movers. They move the air in the room to help prevent stagnated air and provide a ...

All pedestal fans (model 2535 included) have screws inside of the neck of the motor assembly. In this case, that screw is designed to pinch against the pole when inserted to hold it in place. Apply...

At the back of the motor assembly for a Lasko pedestal fan, there is a screw that mounts the motor housing to the motor itself. While we do not supply this part directly since the motors are receiv...

You can register your product online by clicking here Should you need any additional assistance, feel free to contact our customer support team at producthelp@laskoproducts.com    

This function allows the unit to be set in Sleep Mode. Pressing the Sleep Button once will set the unit on Low for 6 continuous hours. Pressing the Sleep Button a second time will reset the unit to...

The recommended way to clean a Lasko tower unit would be to take a vacuum with the brush attachment on the hose and vacuum the front and rear grill of the fan from the outside without opening the u...