George

If the fan is not showing on the Bluetooth app, it is possible that a step or two were likely missed in the setup process. This article will walk you through the process.    First of all, make s...

The following are the Specifications for the VG-1500   Water Removal Capacity (90F 90% RH): 150ppd Water Removal Capacity (80F 60% RH): 76ppd Power: 7.3 amps, 115 volts Refrigerant: R410a Operating...

How to Start your VG-1500  1. Place dehumidifier inside area to be dried. 2. Make sure all windows and doors are closed to the outside and seal off the wet area from any unaffected areas. 3. Route ...

Air Filter: Replacement frequency is very subjective, as it depends on the cleanliness of the job site air, as well the duration of use. The air filter should be checked regularly. Operating the de...

CAUTION: This dehumidifier is designed to meet or exceed safety and performance standards for dehumidification equipment. Use only manufacturers’ replacement parts for service. Use of aftermarket p...

Power Source: 115V / 60Hz Water Removal AHAM (80F 60%RH): 130 pints/day Water Removal Max (90F 90%RH): 225 pints/day Rated Current: 8.5amps Low Side Design Pressure: 240psig High Side Design Pressu...

Cleaning the Air Filter Ensure the dehumidifier is turned OFF and the plug is removed from the power socket before maintenance is carried out.   The working performance of the dehumidifier will be ...

Motor: 1 HPAmps: L 8.7A / M 9.2A / H 10.6AMax Air Volume: 3550 CFMSpeeds: 3Certification: C-ETL-USVoltage: 115VCycle: 60HzMax Static Pressure: 3.1”Net Weight: 39 Lbs (43 Lbs with box)Size (L x W x ...

Possible Cause: Obstructed vents / inlets   Solution:  Clean out bents / inlets   If the above does not work. It may be the motor is giving out and needs to be replaced. Or the capacitor may need t...

1.Press the button on the base. 2.Insert the fan into the bracket until the button pop-up from the hole