Wind Machine Cleaning

Please be sure to have a Phillips head screwdriver available to disassemble the product.

1. Be sure the product is unplugged then lay the fan face down on a flat stable surface. The rear grill should be facing you.

2. Locate and remove the four screws along the outer edge of the back grill and also the two near the handle.

3. At this point, remove the side knobs and disconnect the body of the fan from the base. Next, separate the grills to expose the fan blade.

4. Wipe the blade with a soft damp cloth. Use a mild detergent if necessary. Be very careful that no water comes into contact with the motor. This will damage the motor and the fan will become inoperable.